| Hulls below waterline: |
GRP. Coppercoat over epoxy resin barrier on sanded gelcoat (2018) |
| Seacocks etc: |
Forespar Marelon to heads inlets/outlets (2018), DZR skin fittings and valves elsewhere.
Keel cooler - see under Mechanical and Electrical |
| Topsides: |
GRP painted some years ago - cockpit,deck and coachroof areas will benefit from repainting |
| Deck plan: |
See drawing below |
| Guarding: |
Pulpits and pushpits: Stainless steel (remounted with new bolts 2017).
Stanchion bases: aluminium (2017)
Stanchions: stainless steel (2017)
Guardwires: 5mm stainless steel (2017) |
| Tabernacle: |
Stainless steel, with roller halliard fairlead to cockpit |
| Chainplates: |
Stainless steel |
| Grab rails etc: |
Coachroof grab rails, stainless steel (2017)
For'ard hatch (portlight) guards, stainless steel (2019) |
| Anchor gear: |
2 aluminium hawse leads (one with self launch bow rollers for Rocna 20)
Lofrans Kobra reversing windlass, deck mounted |
| Mooring cleats: |
2 nos. aft, 3 nos. for'ard, 2 nos. midships, all aluminium |
| Sheeting tracks etc: |
Genoa - 2 nos Harken 32mm CB tracks, through bolted (2019)
Staysail - Barton T track through bolted (athwartships - self-tacking)
Main - Barton 'I' section 28mm, through bolted
2 genoa sheet turning blocks aft |
| Jackstay points: |
4 nos. stainless steel U bolts through coachroof/deck |
| Tether anchorages: |
2 nos. stainless steel U bolts on foredeck and in cockpit |
| Saloon door: |
Hinged folding teak (with Perspex windows 2017) |
| Windows: |
10mm and 8mm Perspex (2017) |
| Coachroof hatches: |
2 large and 4 small Lewmar low profile (2017) |
| Escape hatches (aft): |
2 large Lewmar low profile (2017) |
| Aft cabin portlights: |
2 nos. (open into cockpit) |
| Locker lids: |
Foredeck 2 nos., cockpit floor 2 nos. GRP |
| Engine room hatches: |
Cockpit - solid surface hatch lid (2017), can be used as table
Aft deck - GRP hatch |
| Aft pole |
Stainless steel pole, for satellite broadband and other antennae (2018) |
| Rudder protection |
Stainless steel |
| Boarding ladder: |
Stainless steel fold-up ladder |
| Liferaft mount: |
Stainless steel frame and chocks |
| Danbuoy holder: |
Aluminium tube |
| Dinghy roller: |
Crossbeam mounted PVC roller for dinghy recovery |
| Cockpit enclosure: |
fold back 4 hoop stainless steel frame |
| Hydrovane mounts: |
bases on fitted UHDP plates through bolted with large backing plates internally to crossbeam and transom |
| Leg mounting: |
Aluminium transom plate for Silette Catdrive II through bolted to central pod transom |
| Sheet winches: |
2 x Barlow 25ST; (new bearings, pawls and springs 2018) |
| Furling line winch: |
Lewmar 16ST; double Spinlock jammers |
| Halyard winch: |
Lewmar 16ST |